High Resolution P-51C Mustang 'MC-V' "Pretty Baby"             
-----------------------------
This skin  represents the P51C-10-Nt Mustang serial #43-25064 as it appeared Early Summer 1944 in factory applied Olive Drab camouflage, assigned to the 20th FG, 79th FS based at Kingscliffe, England. This Mustang 'MC-V'  was the mount of Captain James N. Reichard who joined the 79th FS the Spring 1944 and eventually rose to Assistant Group Operations Officer. Unlike other members of the 20thFG. Capt. Reichard kept flying his P51C "Pretty Baby" until the end of the war and was credited with a total of  5 Focke-Wulf 190 In-Air victories.    

Camouflage Note; This P-51C Mustang was received by the 20th FG in an All-Metal finish but the Olive Drab Camo scheme was applied, at Kingscliffe, to all the upper surfaces of this aircraft. As to the 'Orders of the Day' only the 'White Identification" stripes were applied to main planes. The' Black & White' nose scheme was the early Group markings applied to all Mustangs when they replaced the Groups P38J Lightnings. The 'Black Square' on bothsides the vertical tail section was the79th's Squadron identification markers which was carried over from the days when the Squadron flow their Lighnings. The aircraft serial number, normally applied to the vertical tail has been covered up by the 'Black Square'.  The engine cowl shows both mission tallys and total air victories of Capt. Reichard.

Skin was created for Emil's ETO 9th.USAAF/2TAF Campaign play.....  

Skin by David "Skylark" Phillips

   
 
---------------------------------------------------------------------------------
Modder's Notes: Due to the increasing number of files required, in order to minimize the download size, the pcx files are not included. However, do not fear, the zip file contains a batch file, P51BHRTPC-PCX, for converting tpc to pcx for those who want to try their hand at skinning. Simply place this file and the accompaning file, gpmTpc2Pcx.exe, in your folder containing the tpc files and execute. This batch file is courtesy of John "Chompy" Masters who also created the 3d model. Much thanks to you John!


USE.
Simply extract all the files into your EAW folder, or install into your skin manager program as it's instructions reccomend. To uninstall, just delete the files listed below.

The new High res 3dz set for the P-51 B is based on the same 3dz's from the P-51 D, with a few changes to get the look right.
1.  Wide view armour added
2.  "Deflection" type gunsight/instrument panel
3.  High res wingview added.

The new 'Damaged Torn Off Wings' (TOW) and 'roughly torn off' wing stub have been added to the aircraft to give more realistic looking damgage FX. 

(Note: Due to time constraints, I have not updated the pcx files to match these damage pcx files created by Chompy. If you wish them to match the current scheme, the pcx files are made available for your use.)

The only changes to the main file set (when compared to the D's files) are the inclusion of separate TOW damage PCX's.  The Complete file list and their uses are as follows-

PP51bA.3dz = 3dz file for the Left rear fuselage and tail
Pp51bB.3dz = 3dz file for the Right rear fuselage and tail.
Pp51bC.3dz = 3dz file for the Cockpit area.
Pp51bE.3dz = 3dz file for the Right wing.
Pp51bF.3dz = 3dz file for the Front fuselage, left and right
Pp51bG.3dz = 3dz file for the Left wing.
Pp51bH.3dz = 3dz file for the Gunst type transparent shadow.
Pp51bL.3dz = 3dz file for the Left Torn Off Wing (TOW).
Pp51bM.3dz = 3dz file for the Medium Distance Model (MDM).
Pp51bP.3dz = 3dz file for the Propellor.
Pp51bR.3dz = 3dz file for the Right Torn Off Wing (TOW).
Pp51bS.3dz = 3dz file for the Long Distance Model (LDM).
Pp51bU.3dz = 3dz file for the High res Wingview.
Pp51bV.3dz = 3dz file for the Cockpit - left side.
Pp51bW.3dz = 3dz file for the Cockpit - right side.
Pp51bY.3dz = 3dz file for the in cockpit view of the prop.
Pp51bZ.3dz = 3dz file for the Gunsight and seat.

Pp51bFRT.pcx = file for the FRonT fuselage L and R (F.3dz)
Pp51bLEX.pcx = file for the Left wing (G.3dz)
Pp51bLTW.pcx = file for the Left Torn off Wing (L.3dz)
Pp51bMEX.pcx = file for the MDM and LDM (M and S.3dz)
Pp51bREX.pcx = file for the Right wing (E.3dz)
Pp51bRTW.pcx = file for the Right Torn off Wing (R.3dz)
Pp51bTEX.pcx = file for the cockpit, shadow, prop and cockpit prop (C,H,P and Y.3dz's)
Pp51bTLL.pcx = file for the TaiL Left and rear fuselage (A.3dz)
Pp51bTLR.pcx = file for the Tail Right and rear fuselage (B.3dz)
Pp51bTRA.pcx = transparency file for the TEX file
Pp51bV.pcx   = file for the cockpit (V and W.3dz's)
Pp51bVTR.pcx = Transparency file for the cockpit (clear glass gunsight mod)
Pp51bWNG.pcx = file for the High res wingview (U.3dz)
Pp51bX.pcx   = file for the cockpit guages (X.3dz) 

The X.3dz (guages) is not included.  It's the only file I haven't altered!!

As always, there are still a few rendering issues that I have been unable to solve.  This 3dz is optimized for D3D, but if there is demand, I can work on a separate Glide 3dz.

Thanks to All who helped with the original P-51D HR model, 
Salty for the great textures which make up the base skin and the MEX, for the aircraft/pilot info at the top of the page, and for great construction and skinning detail help. 
Mr J for his Malcolm hood version of the D (the C.3dz uses this) and for his transparency ideas on non-TEX files,
JWC for the wide view armour idea,
Peregrine for the Deflection gunsight idea.
Migge for the cockpit and guage textures
Sorry, thanks and S! to anyone I forgot.

Feel free to send any comments, questions, feedback etc.

John "Chompy" Masters,
4th January 2003.
jdmasters@ozemail.com.au
http://www.ozemail.com.au/~jdmasters/
