| ROTTON50 (EAW Standard models/skins) |
Welcome to the 'EAW
Tally Ho' page of Ray 'Rotton50' Otton.
 Here you will find various downloads created for the flight simulation European Air War by Microprose. These downloads may consists of modified aircraft skins, 3DZ models or add-ons. To download any of the creations, just click on the relevant picture or link.  5/September/2008.To see the latest additions to this page, look for the 
icon. |
 |
Instructions for flying Rotton50's models in OnLine Air Wars (OAW), from Rotton50. |
| AMERICAN DESIGNS | |
| BELL | |
 |
(Version 2
25/June/07 - (OAW compatible) - This aircraft depicts a Bell P-63C
(Korean era P39D), capable of 425 mph at 24,500 feet. Nose weapons - 1x37 mm
cannon and 2x50 cal mgs. Wing weapons - 2x50 cal mgs. This HR model was created by Rotton50, based on files by Col. Gbbon - DeanH - Flying Tiger. (SPIT1 Slot) |
| LOCKHEED | |
 |
(OAW
compatible) - This aircraft depicts a Lockheed F1O-1 (Navalized Lockheed P38),
capable of 365 mph at 12,000 feet. Armed with nose 2x20mm cannon and 2x50 cal
mgs. This model was created by Rotton50, based on files by Col. Gibbon. (P38J Slot) |
 |
(OAW
compatible) - This aircraft depicts a Lockheed TBO-1 (Navy Torpedo bomber),
capable of 340 mph at 9000 feet and armed with 2x50 cal mgs. This model was created by Rotton50, based on files by Col. Gibbon. (P38H Slot) |
 |
(19/June/07 -
OAW compatible) - This aircaft depicts a Lockheed P49C, capable of 462
MPH at 25000 feet. Armament consisted of 2x20mm cannon and 4x50 cal mgs.
This model was created by Rotton50, based on files by Col. Gibbon- Captain Kurt - Airbuddha . (P38J Slot) |
 |
(Version 3 -
26/June/07 - OAW compatible) - This aircraft depicts a Lockheed P38D
Lightning. This model was created by Rotton50, based on the original files from Col. Gibbon. (P38J Slot) |
 |
(OAW
compatible) - This aircraft depicts a Lockheed P-38H 'Lightning', powered by 2
x 1420HP engines, 960m initial climb ratio with a speed of 530km/h at sea
level, 643km/h at 7600m altitude. Armed with 1 x Hispano II and 4 x 0.50
cal. This model was created by Rotton50, based on the original files from Col. Gibbon - Captain Kurt. (P38H Slot) |
 |
(OAW
compatible) - This aircraft depicts a Lockheed P-38J 'Lightning', powered by 2
x 1600HP engines, 1120m initial climb ratio with a speed of 539km/h at sea
level, 675km/h at 7900m altitude. Armed with 1 x Hispano II and 4 x 0.50
cal. This model was created by Rotton50, based on the original files from Col. Gibbon - Captain Kurt. (P38J Slot) |
| NORTHROP | |
 |
(OAW
compatible) - This aircraft depicts a Northrop P-61E, capable of 435 mph at
20,000 feet. Weapons - Nose 4x50 cal mgs and 4x20mm cannon. This model was created by Rotton50, based on the original files from Geo - Steve - Damir. (P38J Slot) |
 |
(OAW compatible) - (Version to 2 - 6/October/07)
- This aircraft depicts a Northrop P-61E-NA, capable of 435 mph at 20,000 feet.
Weapons - Nose 1xMk.213 20mm revolver cannon. This model was created by Rotton50, based on the original files from Geo - Steve - Damir. (P38H Slot) |
 |
(OAW compatible) - This aircraft depicts a
Northrop P-61H, capable of 480 mph at 20,000 feet. Weapons - Nose 6x20mm
cannon. This model was created by Rotton50, based on the original files from Geo - Steve - Damir. (P38J Slot) |
| GRUMMAN | |
 |
(OAW compatible) - This 3DZ model and skin
represents the Grumman F8F-2. This HR 3DZ model was created by Rotton50, based on files by Captain Kurt - Claudio - Geo - Steve Day - Crashin' Jack . (P-47C Slot) |
 |
(OAW
compatible) - (Version to 2 - 6/October/07) - - This aircraft depicts a Grumman
F7F-3 Tigercat, capable of 435 mph at 22,000 feet. Armament consisted of - Nose
4x50 cal mgs and wingroot - 4x20mm cannon. This model was created by Rotton50, based on files by Captain Kurt - Claudio Wilches - Flying Tiger. (P38J Slot) |
 |
(OAW
compatible) - (Version to 5 - 6/October/07) - This aircraft depicts a Grumman
P-65A, capable of 435 mph at 22,000 feet. Nose weapons 4x50 cal mgs. Wing
weapons 4x20 mm cannon. This model was created by Rotton50, based on files by Captain Kurt - Claudio Wilches. (P38J Slot) |
 |
(13/June/07 -
OAW compatible) - This aircaft depicts a Grumman F6F-2 'Hellcat'
prototype. In 1942, the third XF6F was fitted with the 18-cylinder P&W 2800
radial engine with a turbo-supercharger with a 4 bladed prop and designated
XF6F-2r. This model was created by Rotton50, based on files by Captain Kurt - Claudio Wilches - Steve Day - Col. Gibbon - Geo. (P47C Slot) |
 |
This aircraft
depicts a Grumman F4F-3S Floatplane, capable of 254 MPH at 12000 ft and armed
with 4x50 cal mgs. This model was created by Rotton50, based on the original files from Captain Kurt. (P47C Slot) |
 |
(13/June/07 -
OAW compatible) - This aircaft depicts a Grumman F6F-6 'Hellcat'
prototype. In early 1944 two F6F-5s were fitted with the 18-cylinder 2,100 hp
Pratt and Whitney R-2800-18W two-stage blower radial engine which was used by
the F4U-4 Corsair. This model was created by Rotton50, based on files by Captain Kurt - Claudio Wilches - Steve Day - Col. Gibbon - Geo. (P47C Slot) |
 |
(OAW
compatible) - This aircaft depicts a Grumman F6F-5, capable of 640km/h and
armed with 6x Browning .50cal. This enhanced model was created by Rotton50, based on files by Captain Kurt - Claudio Wilches - Steve Day - Geo. (P47D Slot) |
 |
(OAW
compatible) - This aircaft depicts a Grumman F6F-5, capable of 640km/h and
armed with 6x Browning .50cal. This HR model and skin was created by Rotton50. (P47D Slot) |
|
This download is
as above, but for the P-47C slot. This HR model and skin was created by Rotton50. (P47C Slot) |
| NORTH AMERICAN | |
 |
(13/June/07 -
(OAW compatible) - This aircraft depicts a North American NA-98X,
capable of 328 mph at sea level. Nose weapons - 1x75 mm cannon and 8x50 cal
mgs. Defensive turrets - 6x50 cal mgs. This HR model was created by Rotton50, based on the original skin files from Flying Tiger. (P38H Slot) |
 |
(Version 2 -
12/June/07 - (OAW compatible) - This aircraft depicts a North American
B25H, capable of 275 mph at 13,000 feet. Nose weapons - 1x75mm cannon and 8x50
cal mgs. This HR model was created by Rotton50, based on the original files from Captain Kurt. (P38J Slot) |
 |
(Version 5 -
15/Feb/2008 - corrected model - OAW compatible) - This aircraft depicts
a North American A36 Apache (early version), with working dive brakes.
This HR model was created by Rotton50, based on the original files from Skylark. (P51B Slot) |
|
(Version 2 - 15/Feb/2008 - corrected
model -OAW compatible) - This download is as above, but for the P47D
Slot. (File size 1 Meg). (P47D Slot) |
 |
(Version 4 -
15/Feb/2008 - corrected model -OAW compatible) - This download is for
the North American A36B Apache, with working dive brakes. (SPIT 14 Slot) |
|
(Version 3 -
15/Feb/2008 - corrected model -OAW compatible) - This download is for
the North American A36B Apache, with working dive brakes.. (TEMP Slot) |
 |
This download
contains for the updated Malcolm Hood, fitted to the early P-51 B. This enhanced mod was created by Rotton50, using the original files by Skylark. (P51B Slot) |
 |
(Version 2 -
15/February/2008 - corrected model - OAW compatible) - This download is
for the North American P-51D Mustang. This enhanced HR model (corrected cockpit rendering) was created by Rotton50, based on the original files by Salty - Chompy - Col. Landers. (P51D Slot) |
  |
(Version 6 -
15/February/2008 - corrected model - OAW compatible) - This aircraft
depicts a North American P-51G, which was never put into production. It was
powered by a 2250 HP Rolls-Royce engine and had a 5 blade prop. Measured at 495
MPH in tests. This HR model and skin was created by Rotton50, based on the original files by Salty - Flying Tiger - Greg. (P51D Slot) |
 |
(Version 2 -
15/February/2008 - corrected model - OAW compatible) - This aircraft
depicts a North American P-51H, capable of 487 mph at 25000 feet and armed with
6x .50cal. This HR model and skin was created by Rotton50, based on the original files by Salty - Flying Tiger - Greg. (P51B and D Slots) |
 |
(Version 2 -
15/February/2008 - corrected model - OAW compatible) - This aircraft
depicts a North American P-51X, mid-engine experimental model with 2x4 blade
contra-props. Capable of 470 mph at 25,000 feet and armed with 6x.50cal.
This HR model and skin was created by Rotton50, based on the original files by Salty - Skylark. (P51D Slot) |
 |
(OAW compatible)
- This aircaft depicts a P82B Twin Mustang. This enhanced model was created by Rotton50, with skin by Skylark. (P51D Slot) |
| VULTEE | |
 |
(Version 3
25/June/07 - (OAW compatible) - This aircraft depicts a Vultee P-66
'Vanguard', Nationalist Chinese forces. This fighter design was first flown
flown in September 1939. This HR model and skin were created by Rotton50, based on model and skin files by Steve Day - Flying Tiger. (P51D Slot) |
| REPUBLIC | |
 |
(Version 5
18/June/07 - (OAW compatible) - This aircraft depicts a Republic
P-35A. This HR model was created by Rotton50, based on the original model and original skin by Chompy - Flying Tiger. (P47C Slot) |
 |
(Version 5
18/June/07 - (OAW compatible) - This aircraft depicts a Republic P-41
(XP-41), which was a modification of the last P-35 built. This HR model was created by Rotton50, based on the original model and original skin by Chompy - Flying Tiger. (P47D Slot) |
 |
(Version 4
18/June/07 - (OAW compatible) - This aircraft depicts a Republic P-43A
'Lancer' of the Chinese Air Force, operating in the CBI theatre. The Lancer was
the predesessor to the P-47 Thunderbolt. It was capable of 351 MPH, but it's
performance can't be measured by it's military service. It's true contribution
to the war effort was in keeping Republic Aircraft solvent and it's workers
employed while the P-47 was designed and built. This HR model and skin was created by Rotton50, based on the original files by Chompy - Skylark. (P47C Slot) |
 |
(Version 4
18/June/07 - (OAW compatible) - This aircraft depicts a Republic P-43A
'Lancer', which was the predesessor to the P-47 Thunderbolt. It was capable of
351 MPH, but it's performance can't be measured by it's military service. It's
true contribution to the war effort was in keeping Republic Aircraft solvent
and it's workers employed while the P-47 was designed and built. This HR model and skin was created by Rotton50, based on the original files by Chompy - Skylark. (P38J Slot) |
 |
(Version 2 -
26/Dec/07 - corrected cockpit rendering -OAW compatible) - This 3DZ
model and skin represents the Republic P-47N Thunderbolt. This 3DZ model and HR skin was created by Rotton50.(File size 2.7 Meg). (P47D and C Slots) |
 |
|
 |
 |
 |
(OAW compatible) - This
3DZ model and skin represents the Republic P-72A fighter, developed from the
P-47 Thunderbolt, but never put into production. This 3DZ model and HR skin was created by Skylark, with enhancements by Rotton50. Included are 3 different camouflage schemes. (File size 1.8 Meg). (P47D Slot) |
 |
(OAW
compatible) - This 3DZ model and skin represents the Republic P-72B fighter,
developed from the P-47 Thunderbolt, but never put into production. This 3DZ model and HR skin was created by Skylark, with enhancements by Rotton50. Included are 2 different camouflage schemes. (File size 1.8 Meg). (P47D Slot) |
 |
|
 |
(OAW
compatible) - This 3DZ model and skin represents the Republic P-72C fighter
(contra-rotating props), developed from the P-47 Thunderbolt, but never put
into production. This 3DZ model and HR skin was created by Skylark, with enhancements by Rotton50. Included are 2 different camouflage schemes. (File size 1.8 Meg). (P47D Slot) |
 |
|
 |
This is a modified P-72 cockpit view, created by Crashin' Jack. |
| CHANCE-VOUGHT | |
 |
(OAW compatible) - This
3DZ model and skin represents the Chance-Vought F2G-2D Corsair. This 3DZ model was created by Steve Day, with enhancements by Rotton50 and HR skin by Flying Tiger. (File size 1.7 Meg). (SPIT2 Slot) |
|
(OAW compatible) - This
download is as above, but for the P51D Slot. (File size 1 Meg). (P51D Slot) |
| CURTISS | |
 |
(Version 2
25/June/07 - (OAW compatible) - This aircraft depicts a Curtiss XP-55C
'Ascender', a pusher aircraft with a forward canard tail, which first flew on
July 1943. This enhanced model was created by Rotton50, based on the original model and original skin by The Firm. (P51B Slot) |
 |
This aircraft
depicts a Curtiss P-42 (tri-colour scheme). It was an attempt by Curtiss to
streamline the radial engined P-36. Moderately successful but over shadowed by
the P-40. . This HR model was created by Rotton50, with skin by Flying Tiger. (TYPH Slot) |
 |
(Version 2 -
28/June/07 - (OAW compatible) - This aircraft depicts a Curtiss P-42
(silver scheme). It was an attempt by Curtiss to streamline the radial engined
P-36. Moderately successful but over shadowed by the P-40. This HR model was created by Rotton50, with skin by Flying Tiger. (P51D Slot) |
 |
(Version 3 -
16/March/07 - OAW compatible) - This aircraft depicts a French Curtiss
Hawk 75 in the tri-colour scheme, armed with 6 x 30 mm calibre machine
guns. This HR model was created by Rotton50, with skin by Flying Tiger. (TYPH Slot) |
 |
This aircraft
depicts a French Curtiss Hawk 75, armed with 6 x 30 mm calibre machine
guns. This HR model was created by Rotton50, with skin by Flying Tiger. (TYPH Slot) |
 |
(Version 2 -
20/March/07 - OAW compatible) - This aircraft depicts a Curtiss Model
75N (light-weight 'export' version of the P-36A). This HR model was created by Rotton50, based on files by Flying Tiger. (TYPH Slot) |
 |
(Version 3 -
16/March/07 - OAW compatible) - This aircraft depicts an American
Curtiss P-36D, armed with 2 x 50 calibre machine guns and 4 x 30 calibre
machine guns. This HR model was created by Rotton50, with skin by Flying Tiger. (P47D Slot) |
 |
(Version 3 -
14/March/07 - OAW compatible) - This aircraft depicts an American
Curtiss P-36E, armed with 8 x 30 calibre machine guns. This HR model was created by Rotton50, with skin by Flying Tiger. (TYPH Slot) |
 |
(Version 2 -
22/September/06 - corrected skin/3DZ files) - This aircraft depicts an American
Curtiss P-36F, armed with 2 x 50 calibre machine guns and 2 x 20 mm cannons in
underwing pods. This HR model was created by Rotton50, with skin by Flying Tiger. (TYPH Slot) |
 |
(Version 2 -
22/September/06 - corrected skin/3DZ files) - This aircraft depicts a Curtiss
YP-37 (early colour scheme), a 1938 attempt by Curtiss to get more speed out of
the Curtiss P-36 airframe. This HR model and skin was created by Rotton50, based on the original files by Flying Tiger. (P51B Slot) |
 |
(Version 2 -
22/September/06 - corrected skin/3DZ files) - This aircraft depicts a Curtiss
YP-37 (late clour scheme), a 1938 attempt by Curtiss to get more speed out of
the Curtiss P-36 airframe. This HR model and skin was created by Rotton50, based on the original files by Flying Tiger. (P51B Slot) |
 |
(Version 5
18/June/07 - (OAW compatible) - This aircraft depicts a Curtiss YP-37
(CBI colour scheme), a 1938 attempt by Curtiss to get more speed out of the
Curtiss P-36 airframe. This HR model and skin was created by Rotton50, based on the original files by Flying Tiger. (P38H Slot) |
 |
(Version 3
18/June/07 - (OAW compatible) - This aircraft depicts a Curtiss P-40Q, a
streamlined version of the P-40. It was capable of 422 MPH at 22,000 ft but
never saw production. This HR model and skin was created by Rotton50, based on the original files by Salty - Flying Tiger. (P51B Slot) |
 |
(OAW compatible) - This
aircraft depicts a Curtiss P60C, capable of 420MPH at 25000 feet and armed with
6x50 cal mgs. This HR model was created by Rotton50, based on the original files from Chompy - Flying Tiger - Skylark. (P47C Slot) |
| ITALIAN DESIGNS | |
| MACCHI | |
.jpg) |
(OAW
compatible) - This aircraft depicts a Macchi MC207V. This enhanced HR model was created by Rotton50. (109E Slot) |
.jpg) |
| GERMAN DESIGNS | |
| FOCKE-WULF | |
 |
(OAW compatible)
- This aircaft depicts a Focke-Wulf 187 V6, capable of 397 mph at 24000 feet.
Armament was Nose: 3 x 20mm cannnon and 2 x 7.5 mm mg's. Rear cabin: 1 x 7/5 mm
mg. This enhanced model was created by Rotton50, with skin by Flyright. (ME110G and ME410 Slots) |
 |
(OAW compatible)
- This aircaft depicts a Focke-Wulf 187 V1, capable of 329 mph at 15000 feet
and armed with 2 x 20mm cannon and 2 x 7.5mm mg's. This enhanced model was created by Rotton50, with skin by Flyright. (ME110C Slot) |
 |
(OAW compatible)
- This aircaft depicts a Focke-Wulf 187 A2/R2, capable of 407 mph at 30000
feet. Armament was Nose: 6 x 20m cannnon and Rear cabin: 1 x 7/5 mm
mg. This enhanced model was created by Rotton50, with skin by Jamie Richards. (ME110G Slot) |
 |
(OAW compatible)
- This aircaft depicts a Focke-Wulf 187 A1/U3, capable of 362 mph at 12000
feet. Armament was Nose: 1 x 37mm cannnon, 2 x 12.5 mm mg's. Rear cabin: 1 x
7/5 mm mg. This enhanced model was created by Rotton50, with skin by Flying Tiger. (ME110G Slot) |
 |
(OAW compatible)
- This aircaft depicts a Focke-Wulf 187 A0, capable of 350 mph at 15000 feet.
Armament was 2 x 20mm cannon and 2 x 7.5 mm mg's. This enhanced model was created by Rotton50, with skin by Flyright. (ME110G and ME410 Slots) |
| HEINKEL | |
 |
(OAW
compatible) - This aircraft depicts a Heinkel HE111Z, capable of 240 mph at
17000 feet. This enhanced model was created by Rotton50, based on files by VaronH. (HE111 Slot) |
| JUNKERS | |
 |
(OAW
compatible) - This aircraft depicts a Junkers Ju-87B 'Stuka', capable of 232
mph at 13,500 feet and armed with 2xMG17 and 1x500KG bomb. This enhanced HR model (working dive brakes) was created by Rotton50, based on files by Col. Gibbon - Flying Tiger. (190A and 109K Slots) |
 |
(OAW
compatible) - This aircraft depicts a Junkers Ju88P-1, capable of 410km/h at
sealevel, 500km/h at 5200m. Armed with a 75mm cannon. This enhanced HR model (working dive brakes) was created by Rotton50, based on files by Col. Gibbon - DeanH. (ME110G Slot) |
 |
(OAW
compatible) - This aircraft depicts a Junkers Ju88P-3, capable of 410km/h at
sealevel, 500km/h at 5200m. Armed with 2x37mm cannon. This enhanced HR model (working dive brakes) was created by Rotton50, based on files by Col. Gibbon - DeanH. (ME110G Slot) |
 |
(OAW
compatible) - This aircraft depicts a Junkers Ju88P-4, capable of 410km/h at
sealevel, 500km/h at 5200m. Armed with a 50mm cannon. This enhanced HR model (working dive brakes) was created by Rotton50, based on files by Col. Gibbon - Flying Tiger. (ME110C Slot) |
| HENSCHEL | |
 |
(25/July/07 -
cockpit and flight files OAW compatible) - This aircaft depicts a
Henschel HS129 B2 of the 4./SchG 2, Serial: <0 (W.Nr.0310), North Africa,
September 1942. This aircraft capable of 254 mph at 12,500 feet and carried
2x20mm cannon and a single 37mm cannon. This model was created by Rotton50, based on files by Flying Tiger - Flyright. (ME110C Slot) |
 |
(25/July/07 -
cockpit and flight files OAW compatible) - This aircaft depicts a
Henschel HS129 B2 of the Stab IV(Pz)/SG 9, Serial: <|+A (W.Nr.0795), Russia,
1944-1945. This aircraft capable of 254 mph at 12,500 feet and carried 2x20mm
cannon and a single 37mm cannon. This model was created by Rotton50, based on files by Flying Tiger - Flyright. (ME110C Slot) |
|
 (Version 3 -
27/May/08) OAW compatible) - This download is as for the aircraft
above, but armed with a single 50mm cannon.This model was created by Rotton50, based on files by Flying Tiger - Flyright. (ME410 Slot) |
 |
(25/July/07 -
cockpit and flight files OAW compatible) - This aircaft depicts a
Henschel HS129 B-3 of the Stab IV(Pz)/SG 9 Serial: <|+A (W.Nr.0795) Russia,
1944-1945. This aircraft capable of 254 mph at 12,500 feet and carried 2x20mm
cannon and a single 75mm cannon. This model was created by Rotton50, based on files by Flying Tiger - Flyright. (ME110G Slot) |
 |
(25/July/07 -
cockpit and flight files OAW compatible) - This aircaft depicts a
Henschel HS129 B2 of the 10.(Pz)/SG 9, Serial:Black H, Byala Zerkov, February
1944. This aircraft capable of 254 mph at 12,500 feet and carried 2x20mm cannon
and a single 37mm cannon. This model was created by Rotton50, based on files by Flying Tiger - Flyright. (ME110C Slot) |
|
(25/July/07 -
cockpit and flight files OAW compatible) - This aircaft depicts a
Henschel HS129 B2 of the 1Stab IV(Pz)/SG 9, Serial: <|+A (W.Nr.0795),
Russia, 1944-1945. This aircraft capable of 254 mph at 12,500 feet and carried
2x20mm cannon and a single 50mm cannon. This model was created by Rotton50, based on files by Flying Tiger - Flyright. (ME110C Slot) |
 |
(Version 3 -
27/May/08) OAW compatible) - This aircaft depicts a Henschel HS129 B-3
of the IV(Pz)/SchG 9, Serial: MO + H 1, in temporary winter camouflage, Eastern
Front, 1943. This aircraft capable of 254 mph at 12,500 feet and carried 2x20mm
cannon and a single 75mm cannon. This model was created by Rotton50, based on files by Flying Tiger - Flyright. (ME410 Slot) |
| ARADO | |
 |
(Version 4 -
5/August/07 - OAW compatible) - This aircaft depicts an Arado Ar 234A-1
'Blitz' (Lightning). the unarmed recon version. This model was created by Rotton50, based on files by not known. (ME110C Slot) |
 |
(Version 4 -
5/August/07 - OAW compatible) - This aircaft depicts an Arado Ar 234B-1
'Blitz' (Lightning), capable of 460 mph at 18,000 feet and armed with 2x20mm
cannon. This model was created by Rotton50, based on files by not known. (ME110C Slot) |
 |
( OAW
compatible) - This aircaft depicts an Arado Ar 234B-U2 'Blitz' (Lightning),
capable of 460 mph at 18,000 feet and armed with 1x20mm Mk.213 revolver
cannon. This model was created by Rotton50, based on files by not known. (ME110C Slot) |
| MESSERSCHMITT | |
 |
( OAW
compatible) - This aircaft depicts a Messerschmitt ME109W float plane, capable
of 331 mph at 20000 feet and armed with 2xMG17 and 1x20mm cannon. This HR model was created by Rotton50, based on files by Kristoforo . (ME109E Slot) |
  |
( OAW
compatible) - This aircaft depicts a Messerschmitt ME1091 high altitude
fighter, capable of 480 mph at 30,000 feet. Powered by 2 - 3 blade contra-props
and armed with 4x20mm cannnon. This HR model was created by Rotton50, based on files by Col. Gibbon. (ME109K Slot) |
 |
( OAW
compatible) - This aircaft depicts the 'proposed' Messerschmitt ME109 V38,
capable of 405 mph at 25,000 feet. Armed with 2x20mm nose cannons and 1x37 mm
cannon. Also a rearward firing 20 mm cannon. This model was created by Rotton50. (ME110C Slot) |
 |
( OAW
compatible) - This aircaft depicts the 'proposed' Messerschmitt ME109 V38,
capable of 405 mph at 25,000 feet. Armed with 2x20mm nose cannons and 1x37 mm
cannon. Also a rearward firing 20 mm cannon. This model was created by Rotton50. (ME110C Slot) |
 |
(OAW
compatible) - This aircraft depicts a Messerschmitt ME 410A1-U2, capable of
540km/h at sea level, 625km/h at 7300m. Weapons 4 x MG151/20 , 2 x MG17, 2 x
MG131(tail). This model was created by Rotton50, based on the original files from Claudio Wilches. (ME110G Slot) |
|
This download is as above, but for the (ME410 Slot) |
 |
(OAW
compatible) - This aircraft depicts a Messerschmitt ME 410B2-U3, capable of 404
mph at 19000 feet. Weapons 4 - 20 mm cannon. This model was created by Rotton50, based on the original files from Claudio Wilches. (ME110C Slot) |
|
This download is as above, but for the (ME110G Slot) |
|
This download is as above, but for the (ME 410 Slot) |
 |
(OAW compatible) - This aircraft depicts a
Messerschmitt ME 410B2/U4, capable of 404 mph at 19000 feet. Weapons - 2x20 mm
cannon and 1xMK.214 50mm cannon. This model was created by Rotton50, based on the original files from Claudio Wilches. (ME 110C Slot) |
|
This download is as above, but for the (ME110G Slot) |
|
This download is as above, but for the (ME410 Slot) |
 |
(OAW compatible) - This aircraft
depicts a Messerschmitt ME 410C2/U3, capable of 424 mph at 26000 feet and armed
with 4x20 mm cannons. This model was created by Rotton50, based on the original files from Claudio Wilches. (ME 110C Slot) |
|
This download is as above, but for the (ME110G Slot) |
|
This download is as above, but for the (ME410 Slot) |
 |
(OAW compatible) - This aircraft
depicts a Messerschmitt ME 210-A1, capable of 470km/h at sealevel and 555km/h
at 7300m. Weapons 2xMG151/20, 2 x MG17, 2 x MG131(tail). This model was created by Rotton50, based on the original files from Claudio Wilches. (ME 110C Slot) |
|
This download is as above, but for the (ME110G Slot) |
|
This download is as above, but for the (ME410 Slot) |
|
This download is as above, but for the (ME262 Slot) |
 |
(OAW
compatible)- This aircaft depicts a Messerschmitt Me262 HG-3a, capable of 580
MPH at 19,000 ft. weapons were 4x30mm cannon. This HR model was created by Rotton50, based on files by Mr. J. (ME262 Slot) |
|
This aircaft is as above, but the HG-3b version, armed with a MK 213 revolving 30 mm cannon. |
 |
(OAW
compatible)- This aircaft depicts a Messerschmitt Me 262 Turoprop, capable of
515 mph at 25000 feet and armed with 4xMK108. This HR model was created by Rotton50, based on files by Mr. J - DeanH. (ME262 Slot) |
 |
( (OAW
compatible) - (Version to 2 - 15/June/07) - This aircaft depicts a
Messerschmitt Me-109 V-23, conceived as an replacement for the Bf 109 fighter.
This HR model was created by Rotton50, based on files by Col. Gibbon - Flying Tiger. (109K Slot) |
 |
(OAW
compatible) - (Version to 4 - 6/October/07) - This aircaft depicts a
Messerschmitt Me-109TL, conceived as an alternate jet fighter to the Me-262.
This HR model was created by Rotton50, based on files by Col. Gibbon - Mr.J - Flying Tiger. (ME262 Slot) |
|
This aircaft is as above, but with all associated files included (for skinning etc).( |
|
This aircaft is as above, but for 109E slot. |
|
(Version to 3 - 19/June/07) - This aircaft is as above, but the Messerschmitt Me-109TL-1B version, armed with a MK 213 revolving 20 mm cannon. |
|
This aircaft is
as above, but the Messerschmitt Me-109TL-1B version, armed with a MK 213
revolving 20 mm cannon. (109E Slot) |
 |
(Version 3
18/June/07 - (OAW compatible) - This aircaft depicts a Messerschmitt
Me-309V1, conceived as an alternate fighter to the Me-109. This HR model was created by Rotton50, based on files by Col. Gibbon - Flying Tiger. (109K Slot) |
  |
(Version 3
18/June/07 - (OAW compatible) - This aircaft depicts a Messerschmitt
Me-309V6, conceived as an alternate fighter to the Me-109. This HR model was created by Rotton50, based on files by Col. Gibbon - Flying Tiger. (109K Slot) |
| RUSSIAN DESIGNS | |
| SUKHOI | |
 |
( OAW
compatible) - This aircaft depicts a Sukhoi SU-2 scout and light bomber
aircraft used in the early stages of World War Two. This model was created by Rotton50, based on files by Tailspin. (P47C Slot) |
| JAPANESE DESIGNS | |
| KAWASAKI | |
 |
(OAW
compatible) - This aircaft depicts a Kawasaki Ki-100 II, capable of 363 mph at
19,600 feet. Armament was 2x12.5mm mgs in the nose and 2x20mm cannons in the
wings. This HR model was created by Rotton50, based on files by Col. Gibbon. (109G Slot) |
 |
(15/June/07 -
(OAW compatible) - This aircraft depicts a Kawasaki Ki-96, capable of
373 mph at 19,700 ft. Nose weapons - 1x37 mm cannon and 2x20 mm cannons.
This model was created by Rotton50, based on files by Captain Kurt - Claudio Wilches. (ME110C Slot) |
|
(OAW
compatible) - This aircraft depicts a Kawasaki Ki-96c, capable of 373 mph at
19,700 ft. Nose weapons - 1x 20mm MK213 revolver cannon. This model was created by Rotton50, based on files by Captain Kurt - Claudio Wilches. (ME110G Slot) |
 |
(15/June/07 -
(OAW compatible) - This aircraft depicts a Kawasaki Ki-64A 'Rob',
capable of 429 mph at 19,350 ft. Nose weapons - 2x12.5 mm mgs. Wing weapons -
2x20mm cannons. This HR model was created by Rotton50, based on files by Col. Gibbon. (190A Slot) |
 |
(15/June/07 -
(OAW compatible) - This aircraft depicts a Kawasaki Ki-64B 'Rob',
capable of 495 mph at 15, 700 ft. Nose weapons - 2x20mm cannons. Wing weapons -
2x20mm cannons. This HR model was created by Rotton50, based on files by Col. Gibbon. (190D Slot) |
| NAKAJIMA | |
 |
(15/June/07 -
(OAW compatible) - This aircraft depicts a Nakajima Ki-62a, capable of
376 mph at 15,700 feet. Nose weapons - 2x12.5 mm mgs, Wings - 2x12/5 mm
mgs. This HR model was created by Rotton50, based on files by Col. Gibbon . (109E Slot) |
 |
(15/June/07 -
(OAW compatible) - This aircraft depicts a Nakajima Ki-62b, capable of
416 mph at 15,700 feet. Nose weapons - 2x12.5 mm mgs, Wings - 2x20mm
cannon. This HR model was created by Rotton50, based on files by Col. Gibbon . (109G Slot) |
| RIKUGUN/KOKUKOSHO | |
 |
(OAW
compatible) - (Version to 3 - 15/June/07) - This aircraft depicts a
Rikugun/Kokukosho Ki-93a twin-engined anti-tank/ground attack
aircraft. This model was created by Rotton50, based on files by Claudio Wilches - Migge. (ME110G and 410 Slots) |
|
(OAW
compatible) - This aircraft depicts a Rikugun/Kokukosho Ki-93C, a 'what if'
design, armed with a 30mm Mk.213 revolver cannon. This model was created by Rotton50, based on files by Claudio Wilches - Migge. (ME110G Slot) |
|
(OAW
compatible)- This aircraft as above, but for a different slot. (ME410 Slot) |
| KYUSHU | |
 |
(13/June/07 -
OAW compatible) - This aircraft depicts a Kyushu J7w2 'Shinden', which
was a planned upgrade of the J7W1 version, replacing the 2300 HP piston engine
with a 2000 lb thrust turojet. It was never built. This HR model was created by Rotton50, based on files by Charles. (190D Slot) |
| KAWANISHI | |
 |
This aircraft
depicts a Kawanishi E15K Shiun (Violet Cloud). Allied Code Name: 'Norm'.
This model was created by Rotton50, based on the original files from Flying Tiger. (ME110C Slot) |
| BRITISH DESIGNS | |
| AVRO | |
 |
(skin changes 16 May 08) (OAW
compatible) - This aircraft depicts an Avro Manchester Mk.1a bomber, capable of
262 mph at 15,000 feet. This model was created by Rotton50, based on the original files from Captain Kurt. (B26 Slot) |
 |
(OAW compatible) - This aircraft depicts an Avro
Manchester Mk.2b bomber, capable of 302 mph at 15,000 feet. This model was created by Rotton50, based on the original files from Captain Kurt. (B26 Slot) |
| BRISTOL | |
 |
(OAW
compatible) - This aircraft depicts a Bristol Beaufighter Mk.Xd, capable of
494km/h at sea level (533km/h iat4800m alt). Armed with 2 x 40mm
cannons. This 3DZ model was created by Rotton50, based on files by Woolfman - Flying Tiger (P38H Slot) |
 |
(OAW
compatible) - This aircraft depicts a Bristol Beaufighter Mk.VIc, capable of
494km/h at sea level (533km/h iat4800m alt). Armed with 4 x 20mm, 6 x
.30cal This 3DZ model was created by Rotton50, based on files by Woolfman - Flying Tiger (P38H Slot) |
|
This download is as above, but for the (TYPH Slot) |
|
This download is as above, but for the (TEMP Slot) |
 |
(OAW
compatible) - This aircraft depicts a Bristol Beaufighter Mk.VII, capable of
330 mph at 9000 feet. Armed with 4 x 20mm, 6 x .30cal This 3DZ model was created by Rotton50, based on files by Woolfman - Flying Tiger (MOSQ Slot) |
|
This download is as above, but for the (SPIT1 Slot) |
 |
(OAW
compatible) - (Version to 2 - 5/July/07) - This aircraft depicts a Bristol
Beaufighter Mk.1 NF, capable of 492km/h at sea level and armed with 4 x 20mm
cannons, 6 x .30 cal mguns. This 3DZ model was created by Rotton50, based on files by Woolfman - Flying Tiger. (TEMP Slot) |
 |
(OAW
compatible) - (Version to 2 - 5/July/07) - This aircraft depicts a Bristol
Beaufighter Mk.1C of Coastal Command, capable of 492km/h at sea level and armed
with 4 x 20mm cannons, 6 x .30 cal mguns. This 3DZ model was created by Rotton50, based on files by Woolfman - Flying Tiger. (P-38H Slot) |
 |
(OAW
compatible) - (Version to 2 - 5/July/07) - This aircraft depicts a Bristol
Beaufighter Mk.1F, capable of 492km/h at sea level and armed with 4 x 20mm
cannons, 6 x .30 cal mguns. This 3DZ model was created by Rotton50, based on files by Woolfman - Flying Tiger. (SPIT1 Slot) |
 |
(OAW
compatible) - (Version to 2 - 5/July/07) - This aircraft depicts a Bristol
Beaufighter Mk.1D, capable of 492km/h at sea level and armed with 2 x 20mm
cannons, 1 x 40mm cannon. This 3DZ model was created by Rotton50, based on files by Woolfman - Flying Tiger. (MOSQ Slot) |
|
(Version to 2 - 5/July/07) - This download is as above, but for the (HURR Slot) |
| MILES | |
  |
(OAW
compatible) - This aircraft depicts a Miles M-20, with both fixed (Mk.1) and
retractable undercarriage (Mk.2). Capable of 333 mph (353 mph Mk.2) at 15000
feet and was armed with 8x303 cal mgs. This model was created by Rotton50, based on files by Flying Tiger. (TYPH Slot) |
| SUPERMARINE | |
 |
(OAW
compatible) - This aircraft depicts a Supermarine Seafang FR 32, Naval version
of the Spiteful. This HR model was created by Rotton50, based on the original model and original skin files o Col. Gibbon - DeanH - Flying Tiger. (SPIT14 Slot) |
 |
(OAW
compatible) - This aircraft depicts a Supermarine Spiteful FR 16. This HR model was created by Rotton50, based on the original model and original skin files o Col. Gibbon - DeanH - Flying Tiger. (SPIT9 Slot) |
 |
(OAW
compatible) - This aircraft depicts a Supermarine SeaFire Mk.47 (with
contra-rotating prop). This HR model was created by Rotton50, based on the original model and original skin files o Col. Gibbon - DeanH - Flying Tiger. (SPIT9 Slot) |
 |
(OAW
compatible) - This aircraft depicts a Supermarine Spitfire Mk.IX Floatplane,
capable of 377 mph at 19,000 feet and armed with 2x20mm cannon. This HR model was created by Rotton50, based on the original files from Mosi. (SPIT 9 Slot) |
 |
(OAW compatible) - This
aircraft depicts a Supermarine Spitfire Mk.XVII, capable of 440 mph at 25000
feet and armed with 4x20 mm cannon. This HR model was created by Rotton50, based on the original files from Col. Gibbon - Flying Tiger. (SPIT 9 Slot) |
 |
(OAW compatible) - This
aircraft depicts a Supermarine Spitfire Mk.XVI, capable of 440 mph at 25000
feet and armed with 2x20mm cannon and 2x50cal mgs. This HR model was created by Rotton50, based on the original files from Col. Gibbon - Flying Tiger. (SPIT 9 Slot) |
|
This download is as above, but for the (SPIT 14 Slot) |
|
(OAW compatible) - This
3DZ model and skin represents a Supermarine Spitfire Mk.XIV with Malcolm
Hood. This HR model was created by Rotton50, based on the original files from Col. Gibbon. (SPIT 14 Slot) |
| DE-HAVILLAND | |
 |
(Version 4
18/June/07 - (OAW compatible) - This aircraft depicts a De-Havilland
Mosquito MK.XVIII, capable of 377 mph at 13,000 feet. Weapons - 1x57 mm cannon
and 4x30 cal mgs. This model was created by Rotton50, based on files by Claudio Wilches - Flying Tiger. (MOSQ Slot) |
|
(Version 4 18/June/07 - (OAW compatible) - This download is as above, but for the (P38H Slot) |
 |
(Version 3 -
4/Nov/07 - OAW compatible)- This aircraft depicts a De-Havilland D.H.
103 'Hornet' Mk.1. This model was created by Rotton50, based on the Mosquito model and original skin by J.O'Neill. (TEMP and MOSQ Slots) |
 |
(Version 2 -
4/Nov/07 - OAW compatible) - This aircraft depicts a De-Havilland D.H.
103 'Hornet' Mk.III. This model was created by Rotton50, based on the Mosquito model and original skin by J.O'Neill. (TEMP and MOSQ Slots) |
 |
This aircraft
depicts a De-Havilland D.H. 103 'Hornet' Mk.III in camouflage colour
scheme. This model was created by Rotton50, based on the Mosquito model and original skin by J.O'Neill. (TEMP and MOSQ Slots) |
| WESTLAND | |
 |
(Version 2 -
26/June/07 - OAW compatible) - This aircraft depicts a Westland
Whirlwind Mk.1 of No.263 Squadron, RAF, operating between June 1940 and June
1942. This enhanced model was created by Rotton50, based on the original files by Charles - Claudio. (P38H Slot) |
 |
(Version 2 -
26/June/07 - OAW compatible) - This aircraft depicts a Westland
Whirlwind Mk.III. This enhanced model was created by Rotton50, based on the original files by Charles - Claudio. (MOSQ Slot) |
 |
(OAW
compatible) - This aircraft depicts a Westland Whirlwind Mk.IID, capable of 365
mph at 12000 ft. Armed with 2x.30 cal mgs and 1x40mm cannon. This enhanced model was created by Rotton50, based on the original files by Charles - Claudio - Moggy - Migge - Flying Tiger. (P38H Slot) |
 |
(OAW
compatible) - This aircraft depicts a Westland Whirlwind Mk.IV, capable of 350
mph at 12000 ft. Armed with 2x.50 cal m/guns and 1x40mm cannon. This enhanced model was created by Rotton50, based on the original files by Charles - Claudio - Moggy - Migge - Flying Tiger. (P38H Slot) |
| MARTIN-BAKER | |
  |
(Version 4 -
2/November/07 - OAW compatible) - This aircraft depicts a Martin Baker
MB-3 prototype fighter, powered by a 2,000 h.p. Napier Sabre 24cylinder H-type
engine, driving a De Havilland variable-pitch three-blade propeller.
This HR model was created by Rotton50, based on files by Col. Gibbon - Flying Tiger. (HURR Slot) |
|
This is the above aircraft download, but for the P-51D Slot. |
  |
(OAW
compatible) - (Version to 5 - 2/November/07) - This aircraft depicts a Martin
Baker MB-5 prototype fighter, considered by many as being the best all-round
fighter developed during World War II. However, it never saw frontline
service. This HR model was created by Rotton50, based on the P51 model/skin, made available by Skylark. (TEMP Slot) |
| HAWKER | |
 |
(Version 3 -
OAW compatible) - This 3DZ model and skin represents a Hawker Hurricane
float plane, capabale of 283 MPH at 17000 feet and armed with
8x.30cal. This enhanced HR3DZ model was created by Rotton50, based on the original aircraft model and skin by Col. Gibbon. (HURR Slot) |
 |
OAW
compatible) - This 3DZ model and skin represents a Hawker Hurricane Mk.IIH,
Hercules powered - 334 mph at 13000 feet with 12x303 cal mgs. This enhanced HR3DZ model was created by Rotton50, based on the original files by Col. Gibbon - Nico. (HURR Slot) |
 |
OAW
compatible) - This 3DZ model and skin represents a Hawker Hurricane Mk.III with
bubble canopy. Capable of 320 mpg at 17000 feet with 8x.30cal mg. This enhanced HR3DZ model was created by Rotton50, based on the original files by Col. Gibbon - Flying Tiger. (HURR Slot) |
 |
OAW
compatible) - This 3DZ model and skin represents a Hawker Hurricane X
(Experimental Hurricane) - 1650 HP, Laminar flow wing design 4 bladed prop.
Capable of 374 mph at 15000 feet with 4x50 cal mgs. This enhanced HR3DZ model was created by Rotton50, based on the original files by Col. Gibbon - Flying Tiger. (HURR Slot) |
 |
OAW
compatible) - This 3DZ model and skin represents a Hawker Hurricane Mk.II
(DB601 engine) 1300HP with 8x303 cal mgs. This enhanced HR3DZ model was created by Rotton50, based on the original files by Col. Gibbon - DeanH. (HURR Slot) |
 |
OAW
compatible) - This 3DZ model and skin represents a Hawker Hurricane VVS (two
crew). This enhanced HR3DZ model was created by Rotton50, based on the original files by Col. Gibbon - Jouni 'Illu' Ollila - DeanH - Captain Kurt - GhostBoy - Claudio Wilches. (HURR Slot) |
 |
(Version 2 -
26/June/07 - OAW compatible) - This 3DZ model and skin represents a
Hawker Sea Fury FB Mk.11 (with contra-rotating prop). This enhanced 3DZ model and skin was created by Rotton50, based on the original model by Charles. (TEMP Slot) |
 |
(OAW
compatible) - (Version to 4 - 8/Sept/07) - This 3DZ model and skin represents a
Hawker Fury Mk.12. This enhanced 3DZ model was created by Rotton50, based on the original model by Charles. The skin was by Steve Day. Assistance given by DeanH. (TYPH Slot) |
