Hoi There!

so probably someone had noticed that i was in a "bit of silence".

After a while of making the Spiralled prop spinner for ME-109G(originally) i have finally decided to make the FW-190's prop too.

Now it is ready to paint or to use...

If you open the pv1v1tex.pcx You will find two nose cone fronts and sides, the cones: the upper one and the left stripe of skins is for Me-109, the cone on the "bottom" and the right stipre is for the Fw-190

The thin red lines are added to it to know where is the end on the elements at the bottom of the stripes there is an extra square of painting. i have added them because if you want to make the spiral look continous, it's easyer just make the line, and take the lower square to the top and you are ready to continue where you have finished at the bottom... !!!the 3dz files are using the squares on the top, and not the bottom ones!!!

You know what to do...

Mr. Johnson.