Hoi There!

So After a long time here it is: an easy to draw Non-mirrored P-51B/C the one you want to have... 

I was bored with the double sided P-51B's, i dunno why but i didn't really liked them mostly their nose, so i have decided to make a B from the P-51D's 3dz. because of the element table is full there are a few minor problems/bugs: 

----> ok now all of them are perished...

- the cockpit's top canopy disappears in a low angle from the right, ----> problem solved with subelements
- behind the pilot there is no "wall" so you can look to the terrain, ----> problem solved with subelements
- behind the cockpit on the turtle back of the plane the top disappears from a low angle(because of the vector at the same time i would have to be able to seen from both sides, but at the moment it can't) ----> problem solved with subelements

these were only minor problems, not essentials.
- one more it comes from the originally used P-51D's 3dz from the absolute back the right side is not drawn...
----> problem solved with the removal of the subelements and applying the original vector for the element, !BUT! If You want to edit the 3dz structure in 3dz studio, make a backup from the 3dz and convert it out to TXT.
After the 3dz edited in 3dz studio, convert out the new 3dz and paste the vectors #180; #182 to the file, and the same goes to vector #129; #139; #192


personally i would like to say thank you for Jeff "Salty" Salter for sending me the basic skin and the and for the 3dz files to Cord Hartmann and Claudio Wilches.

So Paint Her out and take this babe for a round!!!

Mr. Johnson.

Ps.: if You don't want trouble add ALL the Files!!!

