Tempest
                                                                                                             | Display |                                                           
                             | 2D   2D |NeedleMax|              |NeedleMovement| Needle  |Ndle|    | Sprite  | Sprite  |                             |Spte|              
Type|Gage|    |End |2D-X|2D-Y|LabX|LabY| X  | Y  |    |    |    |Mvmt| Low|High|Base|Tip |Tip2|Colr| X  | Y  |Wdth|Hght|    |End |    |End |    |    |Byte|    |    |    
*Low Fuel Light
0400 2300 3096 A701 0000 0000 0000 0000 0000 0000 0000 0000 0100 0000 0000 0000 0000 0000 0000 1F00 EA01 7102 0000 0000 0000 0000 0000 0000 0000 0000 7403 0000 0000 0000
*Gyro 1
0302 0F00 7098 A701 0000 0000 0000 0000 0000 0000 0000 0000 FFFF 0000 0000 0000 0000 0000 0000 1F00 2B01 5802 2000 0C00 0000 0000 0000 0000 0006 0000 0000 0000 0000 0000
Tachometer
0000 0400 F099 A701 1202 B501 0502 CC01 1D02 CC01 0000 0000 9411 0000 EA94 D56D 0600 1A00 0000 1F00 0000 0000 0000 0000 0099 A701 0000 0000 0000 0000 0000 0000 0000 0000
Clock
0600 0E00 A09B A701 5B00 A601 5B00 9701 0000 0000 0000 0000 FFFF 0000 0000 0000 0000 0F00 0800 1F00 0000 0000 0000 0000 809A A701 309B A701 0000 0000 0000 0000 0000 0000
*Altimeter
4201 0200 B09D A701 DA00 6C02 DA00 5702 0000 0000 0000 0000 1027 0000 0000 0000 0500 1500 0F00 1F00 E200 6702 0600 0800 309C A701 009D A701 4003 0000 0000 0000 0000 0000
Oil Temperature
0000 0C00 F09E A701 3802 4802 2E02 5402 3E02 5402 0000 0000 FF00 0000 4F9C 216D 0400 1000 0000 1F00 0000 0000 0000 0000 409E A701 0000 0000 0000 0000 0000 0000 0000 0000
Fuel Level
0000 0A00 D0A1 A701 4B02 0D02 3E02 0502 5802 0602 0000 0000 0000 0100 6CD6 EA2B 0700 0F00 0000 1F00 0000 0000 0000 0000 20A1 A701 0000 0000 0000 0000 0000 0000 0000 0000
Airspeed
0000 0300 50A3 A701 D400 1002 C500 2802 DA00 2A02 0000 0000 F401 0000 B496 C776 0600 1C00 0000 1F00 0000 0000 0000 0000 60A2 A701 0000 0000 0000 0000 0000 0000 0000 0000
Turn and Bank 1 (Top Needle)
0000 1000 D0A4 A701 A301 6A02 8E01 5802 B501 5902 0000 0000 6400 0000 E3DC 1B21 0700 1B00 0000 1F00 0000 0000 0000 0000 E0A3 A701 0000 0000 0000 0000 0000 0000 0000 0000
Turn and Bank 2 (Bottom Needle)
0000 3A00 50A6 A701 A401 6B02 B801 7B02 9201 7B02 0000 0000 6400 0000 7A5B 5DA2 0900 1A00 0000 1F00 0000 0000 0000 0000 60A5 A701 0000 0000 0000 0000 0000 0000 0000 0000
Manifold Pressure
0000 0900 90A7 A701 5E02 D101 6902 C301 5202 DC01 0000 0000 0000 0100 1D1B B9A1 0600 1200 0000 1F00 0000 0000 0000 0000 E0A6 A701 0000 0000 0000 0000 0000 0000 0000 0000
Rate of Climb
0000 0100 30A9 A701 9F01 0F02 BA01 1B02 BA01 0202 60F0 FFFF 401F 0000 0751 BA2D 0500 1E00 0000 1F00 0000 0000 0000 0000 20A8 A701 0000 0000 0000 0000 0000 0000 0000 0000
*Landing Gear
0400 1100 C0A9 A701 0000 0000 0000 0000 0000 0000 0000 0000 FFFF 0000 0000 0000 0000 0000 0000 1F00 0000 CF01 0000 0000 0000 0000 0000 0000 0000 0000 E420 0000 0000 0000
*Flaps
0400 1300 50AA A701 0000 0000 0000 0000 0000 0000 0000 0000 FFFF 0000 0000 0000 0000 0000 0000 1F00 8500 7001 0000 0000 0000 0000 0000 0000 0000 0000 B40C 0000 0000 0000
Oil Pressure
0500 0600 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0100 0000 0000 0000 0000 0000 1F00 FB01 3302 0200 1E00 0000 0000 0000 0000 0000 0000 0000 0000 E0AA A701

Key:
Type - what kind of gauge, i.e. single needle, double needle, needle and sprite, sprite, etc.
Gage - Specific gauge, i.e. Altimeter, Airspeed, etc.
End - end code. Seperates portions of code.
2D-X - X axis of the needle in the 2D cockpit. Total size of cockpit image is 640 x 690.
2D-Y - Y axis of the needle in the 2D cockpit.
2D LabX - X axis of the label in the 2D cockpit.
2D LabY - Y axis of the label in the 2D cockpit.
NeedleMax X - In a gauge that uses a full circle, this is the X axis of the High point, or maximum movement.
NeedleMax Y - In a gauge that uses a full circle, this is the Y axis of the High point, or maximum movement.
NeedleMovement Mvmt - Range of movement. 1 is the most, F is the least.
NeedleMovement Low - For a needle that only moves a portion of a full circle, this is the Low starting point.
NeedleMovement High - For a needle that only moves a portion of a full circle, this is the High point in relation to the Low. Set the low point, then slowly increase this number to set the High point.
Needle Base - Distance from the center pivot point before the start of the needle.
Needle Tip - Distance between the Needle Base and the Needle Tip.
Ndle Tip2 - Same as Needle Tip, but for a second needle, such as the hour hand in the clock.
Colr - Color of the needle. Default is 1F. Orange colors are around B8 to BF.
Sprite X - X axis of the upper left corner of a sprite in the 2D cockpit.
Sprite Y - Y axis of the upper left corner of a sprite in the 2D cockpit.
Display Sprite Wdth - Width of a sprite as displayed in the cockpit - both 2D and 3D.
Display Sprite Hght - Height of a sprite as displayed in the cockpit - both 2D and 3D.
Spte Size - The size of the sprite in bytes. The sprites are in standard WSP format, and begins at byte 45h. 

- Crashin' Jack
- March 12, 2006