P-51 B
                                                                                                             | Display |                                                           
                             | 2D   2D |NeedleMax|              |NeedleMovement| Needle  |Ndle|    | Sprite  | Sprite  |                             |Spte|              
Type|Gage|    |End |2D-X|2D-Y|LabX|LabY| X  | Y  |    |    |    |Mvmt| Low|High|Base|Tip |Tip2|Colr| X  | Y  |Wdth|Hght|    |End |    |End |    |    |Byte|    |    |    
Tachometer
0000 0400 D051 9C01 E201 FD01 DD01 0E02 E701 0E02 0000 0000 9411 0000 9C8B 6474 0500 1200 0000 1F00 0000 0000 0000 0000 2051 9C01 0000 0000 0000 0000 0000 0000 0000 0000
Clock
0600 0E00 8053 9C01 E400 AA01 E400 9C01 0000 0000 0000 0000 FFFF 0000 0000 0000 0000 0E00 0700 1F00 0000 0000 0000 0000 6052 9C01 1053 9C01 0000 0000 0000 0000 0000 0000 
Rate of Climb
0000 0100 E054 9C01 6001 5302 7301 5502 7201 5002 60F0 FFFF 401F 0000 4A44 4239 0500 1400 0000 1F00 0000 0000 0000 0000 1054 9C01 0000 0000 0000 0000 0000 0000 0000 0000
Oil Temperature
0000 0C00 2056 9C01 E601 4B02 D701 4102 F301 4002 0000 0000 FF00 0000 E7D7 6123 0700 1100 0000 1F00 0000 0000 0000 0000 7055 9C01 0000 0000 0000 0000 0000 0000 0000 0000
*Gyro 1
0302 0F00 B056 9C01 0000 0000 0000 0000 0000 0000 0000 0000 FFFF 0000 0000 0000 0000 0000 0000 1F00 0B01 E501 1C00 0B00 0000 0000 0000 0000 0006 0000 0000 0000 0000 0000
*Turn and Bank
0400 1000 F058 9C01 0000 0000 0000 0000 0000 0000 0000 0000 FFFF 0000 0000 0000 0000 0000 0000 1F00 0201 5502 0000 0000 0000 0000 0000 0000 0000 0000 A81B 0000 0000 0000
Hydraulic Pressure
0000 2800 305A 9C01 A301 5902 9501 5402 B101 5402 0000 0000 0000 0100 EDCD 1332 0400 0E00 0000 1F00 0000 0000 0000 0000 8059 9C01 0000 0000 0000 0000 0000 0000 0000 0000
Oil Pressure
0000 0600 705B 9C01 E301 6002 D401 6402 D901 5302 0000 0000 0000 0100 6AB5 4FE5 0500 0F00 0000 1F00 0000 0000 0000 0000 C05A 9C01 0000 0000 0000 0000 0000 0000 0000 0000
Fuel Level
2000 0A00 905C 9C01 E401 6002 EF01 6602 EB01 5602 0000 0000 0000 0100 4E54 D618 0600 0D00 0000 1F00 0000 0000 0000 0000 005C 9C01 0000 0000 0000 0000 0000 0000 0000 0000
Suction
0000 2B00 D05D 9C01 8F01 A801 8001 B201 9D01 B001 0000 0000 FFFF 0000 19A8 1A55 0400 1200 0000 1F00 0000 0000 0000 0000 205D 9C01 0000 0000 0000 0000 0000 0000 0000 0000
*Compass
0400 0800 605E 9C01 0000 0000 0000 0000 0000 0000 0000 0000 FFFF 0000 0000 0000 0000 0000 0000 1F00 9700 9901 0000 0000 0000 0000 0000 0000 0000 0000 0CB5 0000 0000 0000
Airspeed
0000 0300 2061 9C01 D200 4802 E300 4102 C100 4102 0000 0000 F401 0000 1E30 E2CF 0400 1300 0000 1F00 0000 0000 0000 0000 F05E 9C01 0000 0000 0000 0000 0000 0000 0000 0000
Manifold Pressure
0000 0900 8062 9C01 D001 A901 BE01 B201 C401 B901 0000 0000 0000 0100 21AD 2F9A 0400 1400 0000 1F00 0000 0000 0000 0000 B061 9C01 0000 0000 0000 0000 0000 0000 0000 0000
*Altimeter
4801 0200 C063 9C01 D300 F901 D300 E701 0000 0000 0000 0000 1027 0000 0000 0000 0700 1200 0000 1F00 D900 F601 0800 0700 1063 9C01 0000 0000 4004 0000 0000 0000 0000 0000
*Landing Gear
0400 1100 5064 9C01 0000 0000 0000 0000 0000 0000 0000 0000 FFFF 0000 0000 0000 0000 0000 0000 1F00 7300 E101 0000 0000 0000 0000 0000 0000 0000 0000 8608 0000 0000 0000
*Flaps
0400 1300 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 FFFF 0000 0000 0000 0000 0000 0000 1F00 7A00 0302 0000 0000 0000 0000 0000 0000 0000 0000 C804 0000 0000 0000

Key:
Type - what kind of gauge, i.e. single needle, double needle, needle and sprite, sprite, etc.
Gage - Specific gauge, i.e. Altimeter, Airspeed, etc.
End - end code. Seperates portions of code.
2D-X - X axis of the needle in the 2D cockpit. Total size of cockpit image is 640 x 690.
2D-Y - Y axis of the needle in the 2D cockpit.
2D LabX - X axis of the label in the 2D cockpit.
2D LabY - Y axis of the label in the 2D cockpit.
NeedleMax X - In a gauge that uses a full circle, this is the X axis of the High point, or maximum movement.
NeedleMax Y - In a gauge that uses a full circle, this is the Y axis of the High point, or maximum movement.
NeedleMovement Mvmt - Range of movement. 1 is the most, F is the least.
NeedleMovement Low - For a needle that only moves a portion of a full circle, this is the Low starting point.
NeedleMovement High - For a needle that only moves a portion of a full circle, this is the High point in relation to the Low. Set the low point, then slowly increase this number to set the High point.
Needle Base - Distance from the center pivot point before the start of the needle.
Needle Tip - Distance between the Needle Base and the Needle Tip.
Ndle Tip2 - Same as Needle Tip, but for a second needle, such as the hour hand in the clock.
Colr - Color of the needle. Default is 1F. Orange colors are around B8 to BF.
Sprite X - X axis of the upper left corner of a sprite in the 2D cockpit.
Sprite Y - Y axis of the upper left corner of a sprite in the 2D cockpit.
Display Sprite Wdth - Width of a sprite as displayed in the cockpit - both 2D and 3D.
Display Sprite Hght - Height of a sprite as displayed in the cockpit - both 2D and 3D.
Spte Size - The size of the sprite in bytes. The sprites are in standard WSP format, and begins at byte 45h. 

- Crashin' Jack
- March 9, 2006